Embedded Software Engineer, Firmware and RTOS
- (555) 010-0163
- San Jose, CA
- [email protected]
- GitHub
- Relevant Coursework: Embedded Systems, Microcontrollers, Real-Time Operating Systems, Digital Signal Processing, Computer Architecture.
- Wrote SPI, I2C and DMA drivers in C for a battery-powered environmental sensor on an STM32L4 running FreeRTOS.
- Cut average current draw from 410 uA to 95 uA by reworking sleep modes, clock gating and sensor duty cycles, extending battery life from 8 to 30 months.
- Built an over-the-air update path with A/B partitions, signed images and automatic rollback for a fleet of 20,000 devices.
- Cut firmware image size by 28% with link-time optimization and by moving lookup tables to flash, freeing room for new features.
- Developed motor control firmware in C++ on Zephyr for a 6-axis warehouse robot arm, with a 1 kHz control loop.
- Found and fixed a boot race that hung 1 in 500 startups, using a logic analyzer, JTAG and GDB.
- Set up a hardware-in-the-loop rig in Jenkins that runs 120 firmware tests on real boards for every merge.
- Wrote a UART command interface in C for a lab power supply, used by the test team to script calibration runs.
- Ported a sensor driver from a bare-metal loop to FreeRTOS tasks, removing missed samples at high data rates.
- Built a Bluetooth Low Energy thermostat with a custom GATT service and a phone app for schedules.
- Designed the power budget for a 2 year coin cell battery life and verified it with a power profiler.
- Published schematics, firmware and a build guide; 600+ stars on GitHub.
- Built a CAN bus logger that records vehicle frames to an SD card and streams them over Wi-Fi.
- Used a lock-free ring buffer between the ISR and the writer task to log 2,000 frames a second without drops.
- Wrote a Python tool that decodes logs with DBC files and plots signals.