Important Computer Networking Terms

Important computer networking terms are the core vocabulary used in interviews and documentation, including node, packet, protocol, bandwidth, latency, throughput, IP address, port, router and switch. For example, bandwidth is a connection's theoretical maximum capacity, throughput is the rate actually achieved, and latency is the time a single packet takes to arrive.

4 min read

Networking has its own vocabulary, and a lot of it gets used loosely in casual conversation but has a precise technical meaning that interviewers expect you to know exactly. Here are the terms that come up most often.

Core terms

Node. Any device connected to a network, a computer, a phone, a printer, a router. The term is deliberately generic because a "node" can be almost any kind of device.

Packet. A small, self-contained unit of data that includes both the actual content being sent and header information (source address, destination address, sequence number) describing how to handle it. Large transfers get broken into many packets.

Protocol. A defined set of rules that devices agree to follow so they can understand each other, covering things like how data is formatted, how errors are handled, and how a conversation starts and ends. HTTP, TCP, and DNS are all protocols.

Bandwidth. The maximum amount of data a network connection can carry in a given period of time, usually measured in bits per second (Mbps, Gbps). Bandwidth is a ceiling, not a guarantee: a connection with 100 Mbps bandwidth won't always actually move data at 100 Mbps if there's congestion or other limiting factors.

Latency. The time it takes for a single packet to travel from source to destination, usually measured in milliseconds. A high-bandwidth connection can still have high latency (think of a satellite internet connection: it can carry a lot of data, but each individual bit takes a relatively long time to make the physical round trip).

Throughput. The actual, real-world rate of successful data transfer over a connection, as opposed to bandwidth, which is the theoretical maximum. Throughput is almost always lower than bandwidth because of overhead, congestion, and retransmissions.

IP Address. A numeric label assigned to a device on a network, used to identify it and route data to it, similar in spirit to a postal address.

Port. A number that identifies a specific service or application running on a device, letting one IP address host many simultaneous network conversations (port 80 for HTTP, 443 for HTTPS, 22 for SSH, for example).

Router. A device that forwards packets between different networks, deciding the best path for each packet based on its destination address.

Switch. A device that connects multiple devices within the same local network and forwards data only to the specific device it's addressed to, rather than broadcasting it to everyone.

A worked example tying several terms together

Loading a webpage involves: your device (a node) sending packets to a server, addressed using the server's IP address and a specific port (443 for HTTPS), following the HTTP and TCP protocols, over a connection with some amount of bandwidth (the ceiling) but experiencing real throughput (usually lower) and some amount of latency (the delay before the first byte comes back) along the way, possibly passing through a router at your ISP that decides which path the packets take toward the destination.

Where this matters in real systems

These terms show up constantly when diagnosing real network problems: a video call that's choppy might be a latency problem (packets arriving late) rather than a bandwidth problem (not enough capacity), and the fix for each is completely different. Network engineers and site reliability teams use exactly this vocabulary when discussing performance issues, so knowing the precise difference between, say, bandwidth and throughput, isn't academic trivia, it's the language real troubleshooting conversations use.

What interviewers actually ask about these terms

  • "What's the difference between bandwidth and throughput?" Bandwidth is the theoretical maximum capacity of a connection; throughput is the actual real-world rate of data transfer, which is usually lower due to overhead and congestion.
  • "What's the difference between latency and bandwidth?" Latency is how long a single packet takes to arrive; bandwidth is how much data can be carried per unit of time. A connection can have high bandwidth and still have high latency.
  • "What is a protocol, and can you name a few?" An agreed-upon set of rules for how devices communicate; HTTP, TCP, DNS, and DHCP are all real examples.
  • "What's the difference between a router and a switch?" A switch connects devices within the same local network; a router forwards traffic between different networks and decides the path packets take.

Key takeaways

  • A node is any device on a network; a packet is a small unit of data with content plus addressing headers.
  • Bandwidth is the theoretical maximum capacity; throughput is the actual achieved rate, and latency is the delay for a single packet to arrive.
  • Protocols are the shared rules that let devices understand each other's data.
  • IP addresses identify devices, while ports identify specific services running on those devices.
All 101 Computer Networks interview questions

Log in to save which topics you've read across every subject.

Frequently asked questions

What's the difference between bandwidth and throughput?

Bandwidth is the theoretical maximum capacity of a connection; throughput is the actual real-world rate of data transfer, which is usually lower due to overhead and congestion.

What's the difference between latency and bandwidth?

Latency is how long a single packet takes to arrive; bandwidth is how much data can be carried per unit of time. A connection can have high bandwidth and still have high latency.

What is a protocol, and can you name a few?

An agreed-upon set of rules for how devices communicate; HTTP, TCP, DNS, and DHCP are all real examples.

What's the difference between a router and a switch?

A switch connects devices within the same local network; a router forwards traffic between different networks and decides the path packets take.